Stabilizers & Access.

Pat. No. 7,213,590 B2

► Bernie’s patented Control Freak™ system has internal modules made from a secret, proprietary elastomer called “Jel-lubber™” that is as soft as Jello®. They come with or without suspended weights inside them. These variable weighted “Jel-lubber™” modules are placed inside the stabilizer by the shooter, who can move them around to his preference . . . front to back, back to middle etc., to produce a custom balanced bow. The system works better than conventional stabilizers because the vibration and forward inertia of the bow transfers into the suspended weights. The shock and inertia is then dissipated by the jelly-like “Jel-lubber™”. The entire “Control Freak™” line of stabilizers come in black and silver. They are shipped with “Jellubber™” modules and weights to cover any preference. (See photo at right.) Some “Jel-lubber™” modules have, or you can place, all the weight on one side to offset the weight of the bow’s sight, rest and cable guard.

► NEW for this year is an advanced design, one-piece molded Jel-lubber™ module (above right) with 3 holes running it’s entire length. The shooter can easily cut it to length and then insert the furnished 1/3 oz. lead balls into any or all of the holes. The balls are slightly larger than the hole and is held in place by the elasticity of the “Jellubber™”. This new design helps produce perimeter weighting and offers unlimited weight options.

► Also NEW to the Control Freak line is a series of ultra-light Carbon Graphite stabilizers, called “Lite-nin Rods”. These ⁵/₈” diameter rods are the lightest in the industry, weighing as little as 2.3 oz. for a 25” stabilizer. The 32” weighs less than 3 oz.! “Lite-nin Rods” are also available in the Ultra-lite V-bars that start at 9.9 oz., (pictured left) which includes the two Half-Silencers on the ends that can be weighted heavy, medium or light, to balance the bow at full draw, side-to-side and front-to-back. The bow pictured to the left is balanced on a needle!

► Balancing your bow has never before been this easy and accessible. Simply draw the bow several times while looking at the sight bubble. Let down and adjust the Jel-lubber™ modules in the Half-Silencers until the bubble is right in the center every time you pull back. To adjust front-to-back, hold the bow out with a relaxed hand and watch it drop forward or back. Increase or decrease the weight in both of the Jel-lubber™ modules in the Half-Silencers evenly, until it hangs level in your hand. You'll NEVER fight your level again!

Aluminum Tube Stabilizers
Comes in 4 different lengths and 2 colors. Unscrew the end, stack and rearrange the Jel-lubber™ until satisfied with the balance, weight and shock absorption. Ends are drilled and tapped to accept other stabilizers and will screw into any bow. Both ends have O-ring grooves so they can be joined together; make a stabilizer as long or short as desired. Includes O-ring and a selection of Jel-lubber™ modules and individual weights.

Size, color & weight:
4” black ( 3.5 - 5 oz.) order # 04-B
4” silver ( 3.5 - 5 oz.) order # 04-S
5½” black ( 4.5 - 7 oz.) order # 05-B
5½” silver ( 4.5 - 7 oz.) order # 05-S
10” black ( 7 - 11.5 oz.) order # 10-B
10” silver ( 7 - 11.5 oz.) order # 10-S
*22” black (14 - 23.5 oz.) order # 22-B
* while supplies last

Aluminum Tube Stabilizers - LITE

For those who don’t want too much weight, there is the 1” light-weight tube spacer/stabilizers. 11 different lengths and 2 colors. These tubes are factory-sealed and CONTAIN NO JEL-LUBBER™. Ends are drilled and tapped to accept other stabilizers and will screw into any bow. Includes O-ring.

Size, color & weight:

2” black (2 oz.) order # L02-B

2” silver (2 oz.) order # L02-S

3” black (2 oz.) order # L03-B

3” silver (2 oz.) order # L03-S

4” black (2.5 oz.) order # L04-B

4” silver (2.5 oz.) order # L04-S

6” black (3 oz.) order # L06-B

6” silver (3 oz.) order # L06-S

8” black (3.5 oz.) order # L08-B

8” silver (3.5 oz.) order # L08-S

22” black (5 oz.) order # L22-B

22” silver (5 oz.) order # L22-S

25” black (5.5 oz.) order # L25-B

25” silver (5.5 oz.) order # L25-S

28” black (6 oz.) order # L28-B

28” silver (6 oz.) order # L28-S

30” black (6.3 oz.) order # L30-B

30” silver (6.3 oz.) order # L30-S

32” black (6.5 oz.) order # L32-B

32” silver (6.5 oz.) order # L32-S

36” black (7 oz.) order # L36-B

36” silver (7 oz.)order # L36-S

Wraps
A large selection of designs and colors. “Long” will fit a 1” round tube, 28” long. “Short” wraps (1” diameter V-Bar tubes) are 6” long. Arrow wraps available in limited designs and colors. Will fit ³/₈” arrows, 30” long. Call for available colors.

28” long order # WRAP-L
6” short order # WRAP-S
arrow (3) order # WRAP-A

5/8” Aluminum Tube Stabilizers - Aluma-lite

For those who don’t want too much weight, there is the ⁵/₈”diameter Aluma-lite tube spacer/stabilizers. Available in 8 different lengths and 2 colors. Unlike the regular aluminum tube stabilizers, these tubes are factory-sealed and CONTAIN NO JEL-LUBBER™. Ends are drilled and tapped to accept other stabilizers and will screw into any bow.

Size, color & weight:
4" black (1 oz.) order # AL04-B
4" silver (1 oz.) order # AL04-S
6”black (1 oz.) order # AL06-B
6”silver ( 1 oz.) order # AL06-S
8”black (1.2 oz.) order # AL08-B
8”silver (1.2 oz.) order # AL08-S
10”black (1.4oz.) order # AL10-B
10”silver (1.4oz.) order # AL10-S
12” black (1.6oz.) order # AL12-B
12” silver (1.6oz.) order # AL12-S
25” black (3 oz.) order # AL25-B
25” silver (3 oz.) order # AL25-S
28” black (3.3oz.) order # AL28-B
28” silver (3.3oz.) order # AL28-S
30” black (3.5oz.) order# AL30-B
30” silver (3.5oz.) order# AL30-S
32” black (3.7oz.) order# AL32-B
32” silver (3.7oz.) order# AL32-S

Limb Muffler

2¼” x 1½”. Unscrew the lid, stack and rearrange the Jel-lubber™ modules — a phenomenal vibration and shock absorber and the softest elastomer in the industry — until you are satisfied with the balance, weight and shock absorption. Use as a back weight, or attach the Limb Muffler with the bow’s limb bolts. By putting more weight in the Muffler on the bottom limb, it will act like a plumb bob and will help to level the bow, assisting on un-level ground, side hill shots or in a tree stand. Drilled and tapped to accept other stabilizers and will screw into any bow. Includes a selection of Jel-lubber™ modules. (5.5 - 8 oz.)

    Color:
       black order # LMuff-B
       silver order # LMuff-S
       camo order # LMuff-C (while supplies last)

Bernie’s Cheap Freak Stabilizer
Economically priced 6 inch SEALED stabilizer is non-adjustable but contains a floating weight bar suspended in Jel-lubber™, the softest elastomer in the industry. A phenomenal vibration and shock absorber. Ends are drilled and tapped to accept other stabilizers and will screw into any bow. Includes O-ring.

     Color and weight:
       6 oz. black order # CF6-B
       6 oz. silver order # CF6-S
       8 oz. black order # CF8-B
       8 oz. silver order # CF8-S

JEL-luminum RODS (ALUMA-LITE)
Same as ⁵/₈” diameter Aluma-lite Aluminum Tube stabilizers, (above) only with a Jel-lubber™ coating inside – a phenomenal vibration and shock absorber – inside for more shock absorption. Factory sealed, non adjustable. Ideal for the shooter who wants or needs more weight in the front stabilizer and/or needs extra shock dampening. The Jel-lubber™ adds very little weight (1-2 oz.), but increases the dampening effect 5 times over. Ends are drilled and tapped to accept other stabilizers and will screw into any bow.

     Size, color & weight:
       25” black (5.3 oz.) order # JA25-B
       25” silver (5.3 oz.) order # JA25-S
       28” black (5.6 oz.) order # JA28-B
       28” silver (5.6 oz.) order # JA28-S
       30” black (5.8 oz.) order # JA30-B
       30” silver (5.8 oz.) order # JA30-S
       32” black (6 oz.) order # JA32-B
       32” silver (6 oz.) order # JA32-S

Muffler
   2¼” x 2¼”. Unscrew the lid, stack and rearrange the Jel-lubber™ modules — a phenomenal vibration and shock absorber and the softest elastomer in the industry — until you are satisfied with the balance, weight and shock absorption. Can be used as a back or front weight. Drilled and tapped to accept other stabilizers and will screw into any bow. Includes a selection of Jel-lubber™ modules.
(7.5 - 12 oz.)
     Color:
       black order # Muff-B
       silver order # Muff-S
       camo order # Muff-C

Silencers

Silencer Cap
1 ¾” X ½”. Add to any size Silencer male half or Extension to change the shape, size and weight of a Silencer. (½ oz.)

Color:
black order # Sil-CAP-B
silver order # Sil-CAP-S

Hex Knob Speed Connector
1½ inch hex or 2 inch hex by ½ inch wide surface is perfect to get a good grip to tighten down V-Bars or offset bracket on back of bow. Fits all models. Comes with nylon washer.

Color and size:
     1½” black order # KNOB-B
     1½” silver order # KNOB-S
     2” black order # KNOB LG-B
     2” silver order # KNOB LG-S

2 piece. 1¾” diameter. 3 sizes — small (2¼”), medium (3½”) and large (5”). Unscrew, insert appropriate number of weight balls in desired formation in the Jel-lubber™ module — a phenomenal vibration and shock absorber — until you are satisfied with the balance, weight and shock absorption. Can be placed in numerous ways. Drilled and tapped to accept other stabilizers and will screw into any bow. Includes Jel-lubber™ module and weight balls.
Size, color and weight:
Small 2¼” black (5.5 - 8 oz.)
          order # Sil-SM-B
Small 2¼” silver (5.5 - 8 oz.)
          order # Sil-SM-S
Medium 3½” black (7 - 10.5 oz.)
          order # Sil-MED-B
Medium 3½” silver (7 - 10.5 oz.)
          order # Sil-MED-S
Large 5” black (9.5 - 17.5 oz.)
          order # Sil-LG-B
Large 5” silver (9.5 - 17.5 oz.)
          order # Sil-LG-S

Half-Silencer

Half of a Small Silencer, plus Silencer Cap. 1¾” X 1⁵/₈”. Unscrew and place lead balls in the Jel-lubber™ module — a phenomenal vibration and shock absorber and the softest elastomer in the industry — until you are satisfied with the balance, weight and shock absorption. Will screw into any bow. Great for adding to tube stabilizers and V-bar set-ups. Includes a selection of Jel-lubber™ modules. (3.5 - 4.5 oz.)
Color:
black order # Sil-HALF-B
silver order # Sil-HALF-S

45º Drop Bracket

An addition to our 3 part V-Bar or Offset brackets that drops the stabilizers down at a 45° angle as shown, to shift center of gravity back and down, balancing the bow with much less added weight. Sturdy 6061 aluminum. Comes with hardware.

Color:
black order # DROP-B
silver order # DROP-S

Silencer Extension
1¾” X 2½”. Add any number of Extensions to lengthen any Silencer. (Bottom picture shows 2 Extensions and a Small Silencer). Unscrew, insert appropriate number of weight balls in desired formation in the Jel-lubber™ module — a phenomenal vibration and shock absorber — until you are satisfied with the balance, weight and shock absorption. Includes Jel-lubber™ modules and weight balls. (4 – 9 oz.)

Color:
black order # Sil-EXT-B
silver order # Sil-EXT-S

Mini Silencer

2 piece. 1½” X 2” long. Ultralite - 2-6 oz. Male half has fluted end to mate with ⁵/₈” carbon or aluminum rods. Female end tapers to 1” and will mate with 1” tube stabilizers. Unscrew, insert weight balls in the Jel-lubber™ module — a phenomenal vibration and shock absorber — until you are satisfied with the balance, weight and shock absorption. Drilled and tapped to accept other stabilizers and will screw into any bow. Includes Jel-lubber™ module and weight balls.

Color:
black order # Sil-MINI-B
silver order # Sil-MINI-S

3 inch Ultra-Lite V-bar Bracket with drops

Quick detach feature. Solid 1-piece crossmember and 45° arms. Two removable ⁵/₈” 45° drop brackets included. Only 2.4 oz – 33% lighter than our 2” V-Bar. No exposed hardware. Stabilizers can be attached at 90° straight back or dropped down at a 45° angle (shown), to shift center of gravity back and down, balancing the bow with much less added weight. Can be attached to front or back of bow. Very sturdy 6061 aluminum. Ideal for carbon stabilizers and ⁵/₈” aluminum stabilizers. (Stabilizers not included).

Color:
black order # VB3-B
silver order # VB3-S

Multi-positional Lite 2 inch V-bar set
Quick detach feature. Crossmember with two 2 inch side brackets and two 45° drop brackets. Only 3 oz. Comes with all hardware. Side brackets posi-lock into position at 3 different angles; 15°, 45° (shown) and 60°. Stabilizers can be attached at 90° straight back or dropped down at a 45° angle as shown, to shift center of gravity back and down, balancing the bow with much less added weight. Can be attached to front or back of bow. Very sturdy (6061 aluminum) and the most versatile in the industry. (Stabilizers not included.) For 1” or ⁵/₈” aluminum or carbon stabilizers.

Color:
black order # VB2-B
silver order # VB2-S

Multi-positional Lite 8 inch V-bar set
Quick detach feature. Crossmember with two 8-inch side brackets and two 45° drop brackets. Only 5 ozs. Comes with all hardware. Side brackets posi-lock into position at 3 different angles; 15°, 45° (shown) and 60°. Stabilizers can be attached at 90° straight back or dropped down at a 45° angle as shown, to shift center of gravity back and down, balancing the bow with much less added weight. Can be attached to front or back of bow. Very sturdy (6061 aluminum) and the most versatile in the industry.

Color:
black order # VB8-B
silver order # VB8-S

10° Quick Disconnect

10° drop Quick Disconnect allows for 10° offset or drop for your stabilizers and accessories. Half turn on or off for your stabilizers. Wobn’t vibrate loose; simple to use. One-way stainless steel connector pin locks into 1” diameter 6061 machined aluminum housing. Includes mounting screw and nylon washer.

Color:
black order # QD10-B
silver order # QD10-S

Complete V-Bar Set-Up
ULTRA-LITE! Includes: 3" V-Bar, 2 Mini-Silencers and 2 carbon Lite-nin Rods or 2 aluminum Aluma-lite Rods.
Choose 4" 6" or 8".
On aluminum, specify silver or black.
On carbon, also specify silver or black for the Mini-Silencers and V-Bar.

Size, color and weight:
4” black aluminum (7.7 oz.) order # VBAL4-B
4” silver aluminum (7.7 oz.) order # VBAL4-S
6” black aluminum (8.1 oz.) order # VBAL6-B
6” silver aluminum (8.1 oz.) order # VBAL6-S
8” black aluminum (8.6 oz.) order # VBAL8-B
8” silver aluminum (8.6 oz.) order # VBAL8-S
4” black carbon (7.7 oz.) order # VBC04-B
4” silver carbon (7.7 oz.) order # VBC04-S
6” black carbon (8.7 oz.) order # VBC06-B
6” silver carbon (8.7 oz.) order # VBC06-S
8” black carbon (9.2 oz.) order # VBC08-B
8” silver carbon (9.2 oz.) order # VBC08-S

Multi-positional Lite 5 inch V-bar set
Quick detach feature. Crossmember with two 5-inch side brackets and two 45° drop brackets. Only 4 ozs. Comes with all hardware. Side brackets posi-lock into position at 3 different angles; 15°, 45° and 60°. Stabilizers can be attached at 90° straight back or dropped down at a 45° angle, to shift center of gravity back and down, balancing the bow with much less added weight. Can be attached to front or back of bow. Very sturdy (6061 aluminum) and the most versatile in the industry.

Color:
black order # VB5-B
silver order # VB5-S

Offset Brackets
Stabilizer offset bracket. Multi-positional bracket allows for perfect balance of your bow by offsetting the weight of sight, quiver and arrow rest. Includes mounting screw for front or back of bow.

Color and size:
black 2” order # OSB2-B
silver 2” order # OSB2-S
black 5” order # OSB5-B
silver 5” order # OSB5-S
black 8” order # OSB8-B
silver 8” order # OSB8-S

Small Quick Disconnect
Allows half turn on or off for your stabilizers. Ideal for smaller ⁵/₈” diameter aluminum tube stabilizers and carbon rod stabilizers.Won’t vibrate loose; simple to use. “Idiot-proof” one-way stainless steel connector pin locks into ¾” diameter 6061 machined aluminum housing. Ideal for small aluminum tube stabilizers and carbon tube stabilizers. Includes mounting screw and nylon washer.

Color:
black order # QDS-B
silver order # QDS-S

Quick Disconnect

Allows half turn on or off for your stabilizers. Won’t vibrate loose; simple to use. “Idiot-proof” one-way stainless steel connector pin locks into 1” diameter 6061 machined aluminum housing. Includes mounting screw and nylon washer.

Color:
black order # QD-B
silver order # QD-S

    Sling
Heavy-duty, easy to adjust sling. The 5-hole bracket that attaches to the bow is made from 6061 aluminum. The top holes are at 45° to angle the rope up and back. The sling itself is made from ³/₈” military repelling cord that is soft, but stiff enough to hold its shape for easy in-and-out in hunting situations. The cord is either black, olive/black or camouflage.

Bracket color:
black order # sling-B   specify cord color: black, olive/black or camo
silver order # sling-S   specify cord color: black, olive/black or camo

End Weights
Add weight to any stabilizer. 1inch diameter; two sizes, stackable. Knurled for easy grip. Silver is made of stainless steel. Black is steel with black oxide coating.

Color, size and weight:
black 1” tall (3.5 oz.) order # EW1-B
silver 1” tall (3.5 oz.) order # EW1-S
black ½” tall (1.5 oz.) order # EW-B
silver ½” tall (1.5 oz.) order # EW-S

Lite-nin Rod
The lightest carbon rod stabilizer in the industry. Ideal for the shooter who wants or needs to balance their bow, but still keep the mass weight low. The shorter lengths are for V-bars. Color: dark weave pattern.

Size and weight:
4” ( .9 oz.) order # C04
6” ( .9 oz.) order # C06
8” (1.1 oz.) order # C08
10” (1.3 oz.) order # C10
12” (1.5 oz.) order # C12
25” (2.3 oz.) order # C25
28” (2.5 oz.) order # C28
30” (2.7 oz.) order # C30
32” (2.9 oz.) order # C32

Jel-lubber™
Inside -->

Hunter Hot Rods
The lightest multi-carbon rod stabilizer available. Made from 3 of the largest/lightest carbon arrow/tubes in the industry — 6.2 GPI. Rods are encased in Jel-lubber™ — a vibration and shock absorber and the softest elastomer in the industry — in both ends (rods never touch the housing) for phenomenal shock absorption that is unavailable in similar stabilizers on the market. Includes an Adjusta-slide that is threaded in the center so our Steel weights can be added for balance. (Shown with optional weights.) Includes a screw-in BowJax. Black only.

Size, color, and weight:
8” black ( 6 oz.) order # 3C08
10½” black ( 7 oz.) order # 3C10

Small End Weights

Smaller stackable end and cap weights for smaller diameter (⁵/₈”) aluminum and carbon. ³/₈” tall. Each weighs just ½ oz. Made of steel; silver (nickel-plated) or black (zinc).

Color and type:
Black Cap order # EWC-B
Silver Cap order # EWC-S
Black Stack order # EWS-B
Silver Stack order # EWS-S

Lite-nin JELL-ROD
Same as Lite-nin Rod, only with Jel-lubber™ — a phenomenal vibration and shock absorber — inside for more shock absorption. Factory sealed, non-adjustable. Ideal for the shooter who wants or needs more weight in the front stabilizer and/or needs extra shock dampening. The Jel-lubber™ adds very little weight (1-2 oz.), but increases the dampening effect 5 times over. Color: dark weave pattern.

Size and weight:
25” (4.7 oz.) order # JC25
28” (5.3 oz.) order # JC28
30” (5.7 oz.) order # JC30
32” (6.1 oz.) order # JC32

Target Hot Rods

The lightest multi-carbon rod stabilizer available. Made from 3 of the largest/lightest carbon arrow/tubes in the industry — 6.2 GPI. Rods are encased in Jel-lubber™ — a vibration and shock absorber and the softest elastomer in the industry — in both ends (rods never touch housing) for phenomenal shock absorption that is unavailable in similar stabilizers on the market. Includes 2 Adjusta-slides that are threaded in the center so our Steel weights can be added for desired balance. Also includes a screw-in BowJax. Black only.

Size and weight:
25”    (7.6 oz.) order # 3C25
28”    (7.7 oz.) order # 3C28
30”    (7.8 oz.) order # 3C30
32”    (7.9 oz.) order # 3C32

Small Weights for Hot Rod Adjusta-slides

Small stackable end weights (drilled/tapped through-and-through) and cap weights for Hot Rod Adjusta-slides. ½” diameter. Made of steel. Black only (zinc plated).

Size and weight:
Cap ½” (½ oz.) order # SWSC
Cap ⁷/₈” (¾ oz.) order # SWLC
Stack ½” (½ oz.) order # SWSS

Collar Adapter

To adapt 1” diameter items, such as quick disconnects or Silencers, to smaller diameter Carbon Rods or Ultra-Lite (⁵/₈”) aluminum stabilizers. Comes with O-ring.

Color:
Black order # Collar -B
Silver order # Collar –S

Bow Jax
Super soft polymer, eliminates after-shot vibrations. Eliminates unwanted noise. Light-weight, but heavy on dampening. Black only.

Size and type:
Large Jax 2¼” (slip on; up to 1” dia.) order # JAX-LG
Small Jax 1¾” (screw-in; ⁵/₁₆-24 thread) order # JAX-SM
Limb Jax 1¾” (stick-on; any flat surface) order # JAX-LIMB

	DEAD STOP™ Telescopic String Suppressor (TSS) ECONOMY MODEL (all aluminum) Most economical in the industry Rear mount string suppressor Fits all bows with rear stabilizer bushing Stops string vibration, oscillation and noise Stops string from hitting bow arm Super-light (2.5 oz.) but sturdy aircraft aluminum construction Telescopic design adjusts quickly from 5¼” to 8¼” Increases forgiveness by getting arrow off the string quicker order # TSSR-E
	DEAD STOP™ CARBON Telescopic String Suppressor (TSS) DELUXE MODEL (carbon/aluminum hybrid) Most economical in the industry Rear mount string suppressor Fits all bows with rear stabilizer bushing Stops string vibration, oscillation and noise Stops string from hitting bow arm Super-light (2.5 oz.) but sturdy aircraft aluminum construction Telescopic design adjusts quickly from 5¼” to 8¼” Increases forgiveness by getting arrow off the string quicker INCLUDES one BOWJAX™ for increased vibration dampening Carbon/aluminum hybrid rod for quieter and softer feeling shot order # TSSR-C
	DEAD STOP™ 3 in 1 COMBO FRONT MOUNT Telescopic String Suppressor (TSS)COMBINATION String Suppressor, Quick Disconnect and Rope Sling Most economical in the industry Front Mount string suppressor Fits most bows with front stabilizer bushing Stops string vibration, oscillation and noise Stops string from hitting bow arm Super-light (5.5 oz.) sturdy aircraft aluminum construction Telescopic design adjusts quickly to desired length Increases forgiveness by getting arrow off the string quicker Rope sling is military-type repel rope that keeps its shape Quick disconnect comes in 2 sizes – 1” or ⁵/₈” diameter Includes one BOWJAX™ for increased vibration dampening With 1” Quick Disconnect order # TSSF-LG With ⁵/₈” Quick Disconnect order # TSSF-SM

DEAD STOP™ STEEL HD Telescopic String Suppressor (TSS)
HEAVY DUTY STEEL (for high poundage bows)
Solid Steel construction works on bows 100+ pounds
Zinc coating protects against rust
Most economical in the industry
Rear mount string suppressor
Fits all bows with rear stabilizer bushing
Stops string vibration, oscillation and noise
Stops string from hitting bow arm
Heavy rear mass weight (9.5 oz.) helps balance front-heavy bows and is BH class legal
Telescopic design adjusts quickly from 5¼” to 8¼”
Increases forgiveness by getting arrow off the string quicker
INCLUDES one BOWJAX™ for increased vibration dampening
Protective string serving included

order # TSSR-H

ATTENTION: YOU CAN GET A 30% DISCOUNT ON OUR STAFF SHOOTER PROGRAM!
WE ARE LOOKING FOR ORDINARY PEOPLE TO PUT ON STAFF.
WEAR OUR PATCHES, RECOMMEND OUR PRODUCTS!
SEE STAFF SHOOTER PROGRAM ON THE HOME PAGE FOR MORE DETAILS.

Order Form

PRICING

DESCRIPTION	COLOR	SKU #	PRICE
4 x 1 INCH TUBE (with Jel-lubber)	B S	04	$25.00
5 X 1 INCH TUBE (with Jel-lubber)	B S	05	$30.00
10 X1 INCH TUBE (with Jel-lubber)	B S	10	$40.00
22 X1 INCH TUBE (with Jel-lubber)	B	22	$60.00
2 X 1 INCH TUBE - LITE * (NO Jel-lubber)	B S	L02	$13.00
3 X 1 INCH TUBE - LITE * (NO Jel-lubber)	B S	L03	$17.00
4 X 1 INCH TUBE - LITE * (NO Jel-lubber)	B S	L04	$20.00
6 X 1 INCH TUBE - LITE * (NO Jel-lubber)	B S	L06	$24.00
8 X 1 INCH TUBE - LITE * (NO Jel-lubber)	B S	L08	$26.00
22 X 1 INCH TUBE - LITE * (NO Jel-lubber)	B S	L22	$45.00
25 X 1 INCH TUBE - LITE * (NO Jel-lubber)	B S	L25	$50.00
28 X 1 INCH TUBE - LITE * (NO Jel-lubber)	B S	L28	$55.00
30 X 1 INCH TUBE - LITE* (NO Jel-lubber)	B S	L30	$57.50
32 X 1 INCH TUBE - LITE * (NO Jel-lubber)	B S	L32	$60.00
36 X 1 INCH TUBE - LITE * (NO Jel-lubber)	B S	L36	$70.00
WRAP- long (28”)	call for colors and patterns	WRAP-L	$15.00
WRAP- short (6”)	call for colors and patterns	WRAP-S	$3.50
ARROW WRAPS (set of 3) 28” fits 2413 arrow	call for colors and patterns	WRAP-A	$18.00
5½” X 1” “CHEAP FREAK” (6 oz.)	B S	CF-6	$25.00
5½” X 1” “CHEAP FREAK” (8 oz.)	B S	CF-8	$25.00
4” X ⁵/₈” TUBE - ALUMA-LITE *	B S	AL04	$20.00
6” X ⁵/₈” TUBE - ALUMA-LITE *	B S	AL06	$21.00
8” X ⁵/₈” TUBE - ALUMA-LITE *	B S	AL08	$22.00
10” X ⁵/₈” TUBE - ALUMA-LITE *	B S	AL10	$24.00
12” X ⁵/₈” TUBE - ALUMA-LITE *	B

Hex Knob Speed Connector 1½ inch hex or 2 inch hex by ½ inch wide surface is perfect to get a good grip to tighten down V-Bars or offset bracket on back of bow. Fits all models. Comes with nylon washer.

45º Drop Bracket

Quick Disconnect

Hex Knob Speed Connector
1½ inch hex or 2 inch hex by ½ inch wide surface is perfect to get a good grip to tighten down V-Bars or offset bracket on back of bow. Fits all models. Comes with nylon washer.